The 5 Most Popular Wood Flooring Patterns In Thousand Oaks

wood floor patterns - hardwood area

Choosing Wood Floor Patterns In Thousand Oaks

A Summarized History of Hardwood Floors and Floor Patterns in the United States

To know floor patterns, you have got to learn how our relationship with hard floors has developed.
When the first settlers arrived in the US, they found enormous forests. These new house builders could simply enjoy wooden floors.
Those colonists had plenty of trees, though turning trees to lumber and lumber into floorboards was not easy. The great thing is that those settlers were tough.
They used a method called pit sawing and many arm muscles to turn downed trees into floors.

Development of flooring finishes and floor patterns

At first, those pit sawed boards were nailed down in irregular lengths as is. After years of use and cleaning, they would finally produce a soft surface.
Around the 1800s people began stenciling the wooden flooring with rug patterns and borders. This was pretty fashionable till carpets arrived on the scene.
Patterned and decorative rugs or carpets dominated over wood till the 1870s when people turned to their thoughts.

The Arrival of Carpeting

At the beginning of the 21st century, wooden floors were common and popular even though they stayed expensive.
However, by the end of World War II, the rug was so cheap. Wooden floor manufacturers attempted to compete on the cost by lessening quality. Installers hurried to lay flooring to lower prices even more. Between the 2 of them, they destroyed the reputation of wood as a long-lasting, quality floor.

Restoration of a Classic

Then the 1980s noticed the return of much more real, classy, or clean trends to the community. This return to traditional staples such as polo shirts for men and some shift dresses for women dropped into house decoration.
Suddenly the rural yet modern appearance of wooden floors was in, and prefinished wooden floors were hot. Parquet was not called to the party, although board flooring had formed a comeback.


In the first days of the return, the finish options were insufficient. Therefore designers, installers, and homeowners became creative with the installation pattern. Patterns used from fabric or tile built their way to wooden floors.
Now, the installation pattern is as valuable as the product you choose in planning the finished appearance.

Suggested Patterns In Hardwood Area, Thousand Oaks

There is an almost endless number of methods you can install the hardwood floor. Below are some of the most common and popular ones we suggest at Hardwood Area:

Random
Diagonal
Parquet
Chevron
Herringbone

Random Board Patterns

wood floor patterns - hardwood area

This is the most popular and common hardwood flooring pattern. It has its origins in the floor pattern utilized by those early settlers, and their hand sawed boards.

In this instance, the floor was randomly installed in a straight pattern on the flooring. The lengths of the boards differ to randomize the links. This is done by cutting the beginner piece in every line to a random length. Don’t forget that the looks are always at least 8 inches apart, this is a good installing pattern.

You can also make the boards’ width random or utilize a mixture of both plank width and length to blend things up.

Diagonal Board Patterns

wood floor patterns - hardwood area

Wood floorboards do not surely require to be parallel to the walls. When installed at an angle, they make a place bigger. Small areas seem larger when the floor is placed at a diagonal. This area seems more open, even with dark finishes.

The diagonal floor is also completely ideal for hiding the errors of walls that are not straight.

Parquet Board Patterns

wood floor patterns - hardwood area

The parquet floor pattern originated in France in the year 1500. The name arises from the French word “parquetry,” which means a small section. The installers would use little parts of wood and match them together to build geometric patterns.

Individual “sections” are created by piecing small parts of wood together. Consider these same as tiles. Then the installer sets out the tiles to make the wanted pattern. It can be accidental or geometric.

Chevron Board Patterns

wood floor patterns - hardwood area

The Romans were the first people to find out that a walking surface remained longer if they install the bricks in order with the traffic. It just makes sense that the primary chevron pattern wooden flooring would appear in wealthy Europeans’ houses.

This is that what adds to that beautiful, luxurious European, modern appearance. However, it also adds to output and installing prices. Though it is a sweet appearance and very exciting.

Herringbone Board Patterns

wood floor patterns - hardwood area

The herringbone floor pattern is the brother to the chevron pattern. Both are applied with tile flooring as well as wooden flooring. But be careful with these two. Even experts are sometimes confused with the distinction between the chevron and herringbone patterns.

You get that welcoming and luxurious feeling of the chevron pattern without the raised price of mitering each plank. It is all the show but with more conventional beauty.

Using any of the mentioned patterns will give you endless beauty and improve your houses’ value.

Patterns Hardwood Area Does Not Suggest In Thousand Oaks

There are some patterns that you might come across on a room floor or in a magazine that you did not see on our list above. Which are:

Stair Step
H Pattern

Hardwood Area does not suggest either of these floor patterns as the ultimate visual effect does not showcase the casual natural variation and charm of hardwoods. However, in the case of full knowledge, we are going to tell you about them as well. It is essential to understand the not-so-good floor patterns as well as the great patterns.

Stair Step Board Patterns

This floor pattern is also described as the lightning bolt floor pattern. That is because the board lines are placed to form a stair or zigzag pattern.

The installer builds this floor pattern by placing the first series end to end. Then the subsequent 4 runs begin with planks that are cut smaller than the prior run. Some constructors do this as it allows them to pre-cut piles of boards to the same length and frame and installs much quicker.

When you utilize a stairstep floor pattern, you install seams at regular periods, not random intervals.

H Pattern

Another floor pattern that Hardwood Area does not normally suggest is the H pattern. Though, there is no impact on the endurance or durability of the flooring.
There is no redeeming beauty quality about the H pattern. Sorry to be frank.

Choosing The Floor Pattern

Which floor pattern talks to you? The decision in flooring patterns is very personal. The floor pattern you finally choose should support the whole interior design. below are some points to bear in mind about each pattern:

Random Pattern

Do respect the colonial settlers
Least installing cost
The lowest volume of waste
Ideal for wide places and rectangular areas
Most common needs the part of uniqueness.
Get 10 percent additional for cutting and loss

Diagonal Pattern

Take a 45-degree turn on the random pattern.
It makes small places seem bigger.
Useful when the place is not rectangular
Higher installation price
Unique Beauty
Needs ordering 15 percent extra for cutting and loss

Parquet Pattern

The actual craftsman look
Unique and exciting visual attraction
It can be costly to install pending on its pattern.
Parquet tiles might not waste
Pending on its pattern, it may make the house more difficult to trade

Chevron Pattern

Beautiful European style
Exciting visual attraction
High installation price
Not well filled for joining places.
Unique

Herringbone Pattern

Matter-of-fact chevron
Tense visually
High installation price
It requires less to place than a chevron pattern
It does not work properly in small places

Strips Vs Boards

Wooden floors are available in boards or strips. Strips are a bit narrow, and boards are wider.
Ordinarily, strips are around 1 1/2″ wide up to 2 1/4″ wide. They are built from smaller pieces of the tree and include more limited heartwood.
Boards are normally 3 to 8″ wide. They are made from bigger parts of the tree, are thicker, and include more heartwood.
With the random or diagonal floor pattern, you can combine stripes with boards to further improve the “randomness.” As strips usually require less than boards, this may save a little money as well.

5 Points to Remember about Floor Patterns

Wooden flooring is not just flooring property. They are a durable purchase in your house. They will give years of value and service.
Select the installation pattern of your flooring as accurately as you choose the floor and the installer. Do not forget that:

  1. With spacious floor designs, follow the line of sight in mind when choosing a pattern.
  2. Placing flooring parallel to the largest wall makes the place seem bigger.
  3. If the subfloor on the support is failing, place flooring perpendicular to the flooring strips for durability.
  4. Always adjust the flooring and read the company’s installation guidance before installing; it’ll save you from making regular installation mistakes.
  5. Diagonal flooring patterns are not always at 45-degree angles.

Hardwood Area provides services and flooring installation in Thousand Oaks, Malibu, Calabasas, Camarillo, Westlake Village, Agoura Hills, Oxnard, and Ventura in a professional and quality manner.
Hardwood Area is located at The Oaks Mall, 2nd Floor, 474 West Hillcrest Drive, Thousand Oaks, CA, 91360, United States
Don’t hesitate to call us if you need any further information or free consultation (+1 805-338-6952)

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments