Vinyl Plank Floor: 2 Best Types To Install In Thousand Oaks

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments

vinyl plank flooring - hardwood area

Vinyl Plank Floors: Glue Down or Floating

Vinyl plank flooring is a popular option for both houses and commercial buildings as it is waterproof, amazingly long-lasting, and created to present the appearance of natural wood at a section of the price. One of the most tempting advantages of this flooring is the point that it can simply be placed as a house project and does not need an expensive professional installation method. Vinyl plank floor is normally offered as both a floating and glue-down product.

Glued Down Vinyl Plank

Glue-down vinyl plank flooring uses sticky tape or adhesive tape or liquid adhesive stock to adhere the planks to the subfloor as exposed to each other. This construction technique is more stable in design although takes a much longer time to install, making expert installation a problem.

Floating Vinyl

A click-together tenon and gutter method on the sides of these vinyl planks makes them simple to attach in a constant way that enables them to hang just over the subfloor. The floating creation of the floor makes it suitable for use over a subfloor that has some imperfections. They are simple to connect using a rubber hammer, making them an excellent option for a quick DIY installation method at the house.

Picking the Right Output for your Place

Determining which product is suitable for your place is simple when you know the benefits and drawbacks of each alternative. Both kinds of products are totally waterproof and simple to keep clean and tidy with a vacuum created for a hard wooden flooring and a single mop. The distinctions are more in the refinements.

Rooms and Places

The room represents a significant role in deciding the right flooring product. Vinyl is a pretty popular option as it lasts to either dry or wet areas, enabling it to be utilized continuously from a bedroom into a bathroom or from a living room into a kitchen. Using connected flooring can improve a home to seem more spacious and more open since there aren’t start lines dividing up the visible space. Floating vinyl plank flooring is an excellent option for kitchens, bathrooms, laundry rooms, or bedrooms.

If you are putting flooring in a broad and open area, a glue-down flooring treatment can give more endurance. Of course, glue-down treatments are suitable for smaller places as well. The flooring product has to have guidance for the highest number of square feet it can reach without an outlet. Take notes of those guidelines when determining how frequently changes are required.

READ  8 Best & Pro Tips To Mix Wooden Flooring With Wood Furniture

Noise and Sound

Noise shouldn’t be a concern because either floating or glue-down vinyl plank floors make the same sound when you walk on them. Vinyl planks have several layers and are a comparatively quiet option for any place, particularly in comparison to tile flooring. The noise is defined more by the production of the material than by the installation method. For quiet flooring, look for a vinyl floor with noise-reduction layers, like cork made into the design. If any flooring looks noisy, adding an area carpet or rug in busy places can reduce the sound a lot.

vinyl plank flooring - hardwood areaEndurance

As floating flooring is not formally stuck to the subfloor, there is a chance a plank could arise, particularly if heavy chairs or furniture is moved across the floor. Glue-down construction remains in busy places while decreasing the risk for the floors to turn or raise, particularly if things are often moved or turned across the floors, like furniture or carts. Either one is scratch and damage resistant, making them durable enough to last to heavy things without worrying about dents or flaws.


Even though both outcomes are amazingly long-lasting, sometimes replacements are required. If a part of the floor gets damaged, it can be restored. This is much easier to do with glue-down flooring as it doesn’t have the identical click-in system as floating flooring choices. If you place floating flooring, repairments are yet possible, though it may take a few more abilities to run the new planes into the current flooring. No matter which kind of floor you choose, ensure to save a case of planks for making repairments or changes down the line.

When it comes to remodeling the appearance of your house, both glue-down and floating vinyl floors make excellent choices. They present all the form and beauty of hardwood while enduring and lasting long enough to utilize from the front door right through the bathrooms of the house. Think about the exact production of the product and choose one designed to last to the way the place will be utilized. For the most reliable results, choose a product created for commercial usage and make it a base of your place for countless years to come.


Affordability is one of the principal things to vinyl plank flooring of both installation types. Glue-down vinyl plank flooring is less costly for every square foot than floating ones, though the price gains are then balanced by the fact that extra installation types of equipment are required.

READ  2021 Best Types of Flooring for Laundry Room In Thousand Oaks

If an expert installation is utilized to finish the glue-down process, the entire price of the product or installation could far surpass floating vinyl plank flooring. Even with trained installation, vinyl floor is more affordable than most other kinds of floor. When choosing a product, think about everything required from beginning to finishing and factor it into the whole funds.

Most Suitable Glue for Vinyl Floors

Vinyl floors are a popular option for flooring as it’s simple to install, more permanent, and cheaper than wood floors. Here at Hardwood Area, we want to introduce the most suitable glue for Laminate Floors.

If you are in a rush and you have no time to read so many articles to find out which glue is the best Hardwood Area suggests that the most suitable one for Vinyl Floors is 3M 90 Sprays Contact Adhesive. It runs on Vinyl planks, Tiles, or Sheet floors and is faster and simpler than utilizing an adhesive paste.

The Best option for Vinyl Flooring:

There are numerous kinds of vinyl floors, which include vinyl sheets, vinyl tiles, vinyl board flooring, and vinyl rolls.
Not all vinyl floors require to be glued, and the adhesive you need depends on what kind of flooring you are installing.
Overall, the simplest choice is to utilize spray-on contact glue. The most suitable choice for Vinyl is 3M 90 spray adhesive.

vinyl plank flooring - hardwood areaThe Best option for Vinyl Plank Floors:

Vinyl board flooring is the most popular kind of Vinyl Flooring. It’s popular among family houses, particularly with children or pets as it’s remarkably long-lasting, looks fabulous, and it’s less costly than laminate wood floors or hardwood floors.
Vinyl Boards normally do not require to be glued in smaller places, however, you may need to use adhesive in larger places, or rooms where the boards don’t go to the walls.

The most suitable glue for Vinyl Plank Floors is 3M 90 Contact Adhesive Sprays. Ensure not to utilize it too much, a thin coat is more useful for Vinyl Floors because any parts or cracks under your floor will be obvious and may restrict your boards from fitting together correctly.

How to install:

· Implement a thin coat of 3M Contact Glue to the flooring or underlayment.

· Leave it for a few minutes until it becomes sticky. If you utilized a thin coat 2 or 3 minutes will be enough.

· Lay your planks as normal, making usage of the tongue and gutter method on your floors to match them together.

The Best option for Vinyl Flooring Tiles:

It acts just like a normal contact adhesive paste, though it’s much simpler to make a thin layer on the vinyl, which is important to guarantee there are no seams or raised parts under your fresh floor.
Vinyl tiles are utilized regularly since they are more long-lasting and waterproof than wood or laminate, and much more comfortable to install than ceramic tiles.

READ  Top 10 Attractive Hardwood Floor Trends In Malibu 2021

Numerous vinyl floor tiles appear with self-adhesive backing. If that is the situation, there is no need to utilize any adhesive, just ensure the floors or underlayments beneath your tiles are clean, dry, and free from any dirt or oil.

How to Install

· Implement a thin layer of 3M 90 adhesive to the floor and the backing of all tiles.

· Let the adhesive a few minutes to become sticky to the touch.

· Press the tiles tightly in position.

The Best option for Vinyl Floors on Concrete

Gluing Vinyl Floors to concrete is an easy job, both adhesive paste and adhesive spray will adhere to concrete without any significant difficulties.

The best point about concrete underfloors is that they are normally remarkably flat, making sure you get an excellent finish. In colder environments, you will probably need to place a good underlayment on top of your concrete just before installing the vinyl, since concrete is poor thermic insulation.

The best choice for implementing vinyl plank floors directly to concrete is 3M 90 Contact glue Sprays, and Weldwood Multipurpose Floor glue Pastes.
For big places, the additional labor required in utilizing the paste is worth it, because the spray is much more costly for a big project.

The Best option for Vinyl Plank Floor Rolls

Layers of Vinyl Flooring are more difficult to install than vinyl boards or tiles. Unlike Vinyl Boards, you need to glue down Sheet Vinyl Floors, to ensure it does not come up.
The best choice for vinyl floor rolls is contact glue, both in the spray model and in the past model. You have plenty of time to work utilizing the paste adhesive, although it’s more challenging to get a great finishing.

vinyl plank flooring - hardwood areaConclusion

the most suitable adhesive for Vinyl Plank Floors is 3M 90 Sprays Contact Glue.
For sheet floors, you may prefer to utilize a glue paste, like Weldwood Multipurpose Floor Pastes. And adhesive tape is an opportunity, though not a very useful one.

Hardwood Area provides services and flooring installation in Thousand Oaks, Malibu, Calabasas, Camarillo, Westlake Village, Agoura Hills, Oxnard, and Ventura in a professional and quality manner.
Hardwood Area is located at The Oaks Mall, 2nd Floor, 474 West Hillcrest Drive, Thousand Oaks, CA, 91360, United States
Don’t hesitate to contact us if you need any further information or free consultation (+1 805-338-6952)

0 0 votes
Article Rating
Notify of
Inline Feedbacks
View all comments